NIR

NIR

EMX

The NIR Retro-Reflective Photoeye can be used as a reversing sensor for commercial overhead doors, gates and parking barriers.

Spec Sheet

IRB-MON

IRB-MON

EMX

The IRB-MON is a thru-beam photo eye and is an external entrapment protection device type B1, non-contact sensor for use with automatic gates and doors. The light beam is near infrared and pulses at a rate of 300/second (300Hz). IRB-MON provides a signal to the gate or door operator that the beam is not obstructed. The operating range is up to 115ft. The IRB-MON operates over a wide range of 6-35VDC and 12-24VAC. A green alignment indicator on the receiver provides status information at a glance, making set-up and alignment easy.

Spec Sheet

RBand

RBand

Miller Edge

The Miller Edge RBand is a wireless monitored transmitter/receiver kit for automated gate systems. It monitors the presence and function of T2 (10k) sensing edges and transmits a wireless monitored signal to the operator controls. The RBand Receiver can be paired with up to 6 Transmitters on 2 channels. The Transmitter is built to endure rugged, outdoor environments. The Miller Edge RBand eliminates the need to hard wire sensing edges and meets 2016 UL 325 standards for commercial gate operators.


Spec Sheet

IR-55

IR-55

MMTC

MMTC IR-55 Industrial Through-Beam Infrared Sensor with sender and receiver units in NEMA 4 hooded metal exterior rated enclosures. Sensing distance up to 165 feet, UL 325 compliant, and has an internal heater to prevent frost or moisture buildup.

Spec Sheet

IRB-RET

IRB-RET

EMX

The IRB-RET retro-reflective photo eye is an external entrapment protection device type B1, non-contact sensor for use with automatic gates and doors. The light beam is near infrared and pulses at a rate of 300/second (300Hz). Since the reflector directs the beam back to the photo eye, wiring to the other side of the roadway is not required. The IRB-RET provides a signal to the gate or door operator that the beam is not obstructed. The operating range is up to 60ft.

Spec Sheet

ME-120

ME-120

Miller Edge

The ME-120 is designed for use in a variety of applications, these SensingEdges are extremely durable, and can be used indoor and out. They are resistant to water, flame, common greases and oils. Spec Sheet

VENDORS